Anti-Theft Feature

The audio unit has a coded theft protection circuit. Make sure you have the anti-theft security code before:

• Disconnecting the 12 volt battery.
• Disconnecting audio unit connector A (20P).
• Removing the No. 5 (7.5 A) fuse from the driver's under-dash fuse/relay box.

When the audio unit is reconnected to the power and the ignition switch is turned to ON (II), "CODE" is displayed. Then, enter the 4-digit anti-theft security code.

If you do not have the anti-theft code, see Self Diagnostic Function for information about retrieving the anti-theft code using the iN.

When replacing the audio unit, be sure to give the client the new anti-theft security code.