Oil Pressure Switch Replacement
- Disconnect the oil pressure switch connector, then remove the oil pressure switch (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove all of the old liquid gasket from the switch and the switch mounting hole.
- Apply liquid gasket (P/N 08717-0004, 08718-0003, 08718-0004, or 08718-0009) to the oil pressure switch threads. Install the component within 5 minutes of applying the liquid gasket.
NOTE:
- Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the oil pressure switch.
- If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
- Install the oil pressure switch with a new O-ring (B).
- Connect the oil pressure switch connector.