SH-AWD® Control Unit Replacement

NOTE: The SH-AWD control unit must be initialized (see SH-AWD® CONTROL UNIT INITIALIZATION ) after replacement, otherwise the SH-AWD system will not function.

Remove the trunk front trim panel (see TRIM REMOVAL/INSTALLATION - TRUNK AREA ).
Remove the SH-AWD control unit (A).

Fig 1: SH-AWD Control Unit And Connectors With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the SH-AWD control unit connectors (B).
Install the SH-AWD control unit in the reverse order of removal.