LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2012 >> TL Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> A/C Compressor Relief Valve Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Compressor Relief Valve Replacement

NOTE: If the A/C compressor relief valve released refrigerant to the atmosphere, determine and correct the cause of the excessive system pressure, then replace the relief valve.
  1. Recover the refrigerant with a recovery/recycling/charging station (see REFRIGERANT RECOVERY  ).
  2. Remove the relief valve (A) and the O-ring (B). Plug the opening to keep moisture and foreign material from entering the system, and the A/C compressor oil from running out.
    Fig 1: Relief Valve And O-Ring With Torque Specifications
    G08071106Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Clean the mating surfaces.
  4. Replace the O-ring with a new one, and apply a thin coat of refrigerant oil before installing it.
  5. Remove the plug you installed in step  2, then install and tighten the relief valve.
  6. Charge the system (see SYSTEM CHARGING  ).
scientia non olet · About LEMON Manuals