Forced Starting of the Audio-Navigation Unit

Special Tools Required 

SCS Service Connector 07PAZ-001010A

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
2. Remove the right side kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
3. Connect the SCS service connector (A) to the navigation service check connector (B) located by the passenger's kick panel.
   Fig 1: Connecting SCS Service Connector And Navigation Service Connector

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
5. Check that the diagnosis menu for the picture diagnosis starts up, and then changes to the System Links menu.
   NOTE: If the display fails to display the System Links screen, refer to NO PICTURE IS DISPLAYED TROUBLESHOOTING  (see ).