Add One New Key/Keyless Transmitter

Have a registered key, a new immobilizer key, and the first password from the iN system.
Connect the HDS to the data link connector (DLC).
Turn the ignition switch to ON (II).
Select IMMOBI from the SYSTEM SELECTION MENU, then select IMMOBILIZER SETUP.
Select ADD AND DELETE KEYS, then ADD 1 KEY.
Do the registration according to the instructions on the HDS screen.
Check if the engine can be started with the newly registered key.
When prompted by the HDS, do the keyless transmitter programming.
Make sure the keyless remote operation works properly.