Checks Before Using the Sensor Input Display Mode
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and check the recirculation door function; press the recirculation button to switch from FRESH to RECIRC. The air volume and sound should change slightly.
- Set the desired test temperature using the driver's control switch:
Press the SYNC button off, the LED turns off.
When selecting the test temperature, note these items:
- "Lo" temperature setting will default to MAX COOL, VENT, and RECIRC.
- "Hi" temperature setting will default to MAX HOT, HEAT, and FRESH.
- 58 through 86°F settings will use the automatic climate control logic.
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.