DTC 1403: Audio Error 3 (Display Error)
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- This navigation DTC sets when a mechanical malfunction in the navigation display is detected.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information .
- Clear the hard error code .
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.
- Check for the hard error code .
Is DTC 1403 indicated?
YES - Replace the navigation display unit. ■
NO - Intermittent failure, the system is OK at this time. ■