Navigation Display Unit Removal/Installation

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove these items:
- Front center speaker (see FRONT CENTER SPEAKER )
- Audio-navigation and HVAC switch panel (see AUDIO-NAVIGATION AND HVAC SWITCH PANEL REMOVAL/INSTALLATION )
Remove the tray (A).

Fig 1: Identifying Tray
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the self-tapping screws (A) from the navigation display unit (B).

Fig 2: Identifying Self-Tapping Screws And Navigation Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
From the speaker hole, push out the navigation display unit (A). Then disconnect the connector (B) from the navigation display unit, and remove it.

Fig 3: Pushing Out Navigation Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the navigation display unit in the reverse order of removal.