October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Keyless Access System Mode Switch Test/Replacement
- Remove the glove box (see
GLOVE BOX REMOVAL/INSTALLATION
).
- Disconnect the 2P connector (A) from the keyless access system mode switch (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Push out the keyless access system mode switch from the glove box.
- Check for continuity between the terminals in each switch position according to the table.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- If the continuity is not as specified, replace the switch.
- Install the switch in the reverse order of removal.