Start-Up Procedure and Diagnostic Menu

There are two ways to enter the diagnostic mode:

Model: 

Start the vehicle, and at the disclaimer screen use the navigation hard buttons:

Press and hold the MENU, the MAP/GUIDE, and the CANCEL buttons for about 3 seconds. The display screen goes directly to the Select Diagnosis Items menu shown.

• Self-Diagnosis Mode (runs the automatic diagnosis of the navigation system)
• Detail Information & Setting (Can help you to manually diagnose the navigation system)
  Fig 1: Screen Display - Self-Diagnosis Mode With Detail Information & Setting

  Courtesy of AMERICAN HONDA MOTOR CO., INC.

Mode 2: 

Start the vehicle. When the globe screen appears, connect the SCS service connector (see FORCED STARTING OF THE AUDIO-NAVIGATION UNIT  ) to the navigation service check connector located by passenger's under-dash fuse/relay box. The screen changes to the System Links screen, and automatically begins running the self diagnosis. See the System Links service information for more information.

USA models 

Fig 2: Screen Display - System Links (USA Models)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Canada models 

Fig 3: Screen Display - System Links (Canada Models)

Courtesy of AMERICAN HONDA MOTOR CO., INC.