TPMS Control Unit Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the tire pressure sensors.

TPMS Control Unit - Install

Courtesy of HONDA, U.S.A., INC.

1. Connect the TPMS control unit connector (A)

2. Install the TPMS control unit (B) to the bracket (C).NOTE: Make sure the TPMS control unit is properly installed. You will hear a click when the TPMS control unit is securely mounted on the bracket.

Driver's Dashboard Lower cover - Install

1. Install the driver's dashboard lower cover .
Tire Pressure Sensor ID - Memorize

1. Connect the HDS, and memorize the pressure sensor IDs using the TPMS tool .