Keyless Access Control Unit Removal and Installation (2013-18): Installation

NOTE:

If the keyless access control unit is replaced, do the keyless access registration. If the original keyless access control unit is installed, confirm that all systems work properly.

Keyless Access Control Unit - Install

Courtesy of HONDA, U.S.A., INC.

1. Install the keyless access control unit (A) to the bracket (B) of the power control unit

2. Disconnect the keyless access control unit connectors (C)

3. Disconnect the power control unit connector (D).

Keyless Access System - Registration

1. After replacement, register the keyless access control unit - Refer to: Keyless Access System Registration (2013-15), or Keyless Access System Registration (2016-18) .