HandsFreeLink Control Unit Removal/Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: Tell the client they need to write down all phone numbers stored in the HFL and the navigation imported phone book as there is no way to transfer the information in the original HandsFreeLink control unit to a new HandsFreeLink control unit.

Remove the passenger's dashboard undercover (see PASSENGER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
Disconnect the 28P connector (A) from the HandsFreeLink control unit (B), and remove it.

Fig 1: Identifying Connector (28P) And HandsFreeLink Control Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the HandsFreeLink control unit in the reverse order of removal.
After replacing the HandsFreeLink control unit, tell the client:
- They need to pair their phones to the system.
- They need to set up their system preferences.