DTC P060A: PCM Internal Control Module Malfunction (2013-15)

DTC (PGM-FI)

1. Problem verification:

   - 1. Press the engine start/stop button to select the ON mode.

   - 2. Clear the DTC with the HDS - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2013-15), or How to Troubleshoot the A/T System (2013-15) .

   Clear DTC

   - 3. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P060A PCM Internal Control Module Malfunction

   Is DTC P060A indicated?

   YES 

   Update the PCM if it does not have the latest software, or substitute a known-good PCM , then do the repair verification.

   NO 

   Intermittent failure, the system is OK at this time.

2. Repair verification:

   Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P060A PCM Internal Control Module Malfunction

   DTC (PGM-FI)

   Is DTC P060A indicated?

   YES 

   If the PCM was updated, substitute a known-good PCM , then recheck. If the PCM was substituted, go to step 1.

   NO 

   Troubleshooting is complete. If the PCM was substituted, replace the original PCM . If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.