DTC U3000-51: TPMS Control Unit Programming Error (2013-18)
NOTE:
Do not press the engine start/stop button to select the OFF mode while updating the TPMS control unit. If you press the engine start/stop button to select the OFF mode before completion, the TPMS control unit will be damaged.
| DTC Description | DTC |
|---|---|
| U3000-51 TPMS Control Unit Programming Error |
DTC(TPMS)
- TPMS control unit check (update):
Update the TPMS control unit if it does not have the latest software .
- 2. Press the engine start/stop button to select the OFF mode, then the ON mode.
- 3. Check for DTCs with the HDS.
DTC Description DTC U3000-51 TPMS Control Unit Programming Error Is DTC U3000-51 indicated?
YES
Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit , and recheck.
NO
Troubleshooting is complete.