ANC/Active Sound Control Unit Connector For Inputs And Outputs (2018-19)
ANC/ACTIVE SOUND CONTROL UNIT 20P CONNECTOR (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| 1 | GND | Ground for ANC/active sound control unit (G303) |
| 2 | Not used | - - - |
| 3 | SWD+B | Inputs signal for ANC/active sound control unit switching on/off |
| 4 | F-CAN_H* 3 F-CAN B_H* 4 |
F-CAN bus communication signal |
| 5 | F-CAN_L* 3 F-CAN B_L* 4 |
F-CAN bus communication signal |
| 6 | R MIC SH | Shield for terminal No. 17 |
| 7 | F MIC SH | Shield for terminal No. 18 |
| 8 | Not used | - - - |
| 9 | ANC R- | Outputs noise cancelling signal to stereo amplifier |
| 10 | ANC F- | Outputs noise cancelling signal to stereo amplifier |
| 11 | +B BACK UP (DC)* 1 +B BACKUP* 2 |
Continuous power source |
| 12 | IG1 METER (DC)* 1 IG1 METER* 2 |
IG1 power source |
| 13 | ANC CHK2 | Detects ANC test signal |
| 14 | K LINE | Detects scan tool signal (serial data) |
| 15* 5 | AUD F MIX GND | Not used |
| 16* 5 | AUD F MIX | Not used |
| 17 | R MIC+ | Inputs rear ANC/active sound control microphone signal positive |
| 18 | F MIC+ | Inputs front ANC/active sound control microphone signal positive |
| 19 | ANC R+ | Outputs noise cancelling signal to stereo amplifier |
| 20 | ANC F+ | Outputs noise cancelling signal to stereo amplifier |
*1: With Auto Idle Stop System
*2: Without Auto Idle Stop System
*3: L4 engine
*4: V6 engine
*5: With Navigation