DTC U3000-51: Control Module Programming Error (With SH-AWD)

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTCs (SH-AWD)

1. Problem verification

   -1. Update the SH-AWD control unit.

   - 2. Clear the DTC with the HDS.

   - 3. Start the engine.

   - 4. Check for DTCs with the HDS.

   DTC Description	DTC	Freeze Frame
   U3000-51 Control Module Programming Error

   Is DTC U3000-51 indicated?

   YES 

   The failure is duplicated. Substitute a known-good AWD control unit , and recheck. If this DTC goes away and the SH-AWD control unit was substituted, replace the original SH-AWD control unit .

   NO 

   Intermittent failure, the system is OK at this time.