Keyless Access System Check (2016 2017 2018 2019 2020)
1. Connect the HDS to the data link connector (DLC) - Refer to: How to Troubleshoot the Body Electrical (2016), or How to Troubleshoot the Body Electrical (2014 2015), or How to Troubleshoot the Body Electrical (2017 2018 2019 2020)
2. Turn the vehicle to the ON mode.
3. On the HDS screen, at SYSTEM SELECTION MENU, enter ONE-PUSH START, then select KEYLESS ACCESS CONTROL UNIT or BACKUP CONTROL UNIT.
4. At KEYLESS ACCESS CONTROL UNIT, enter KEYLESS ACCESS SYSTEM INFORMATION, then select SYSTEM CHECK 1 or SYSTEM CHECK 2.
5. At BACKUP CONTROL UNIT, enter SYSTEM INFORMATION, then select SYSTEM CHECK.
6. If the HDS displays NORMAL N-1, the immobilizer system is OK at this time, refer to the STATUS LOG. If the HDS displays any other messages, check as follows:
System Check 1 (Keyless Access/TPMS Control Unit)
| System Check No. | Possible cause | Check items |
|---|---|---|
| A-1A-2A-3G-4 |
|
|
| B-1B-2G-1 |
|
|
| C-1C-2G-2G-3 |
|
|
| C-3C-4 |
|
|
| G-5 |
|
|
*: With electric steering lock
System Check 2 (Keyless Access/TPMS Control Unit)
| System Check No. | Possible cause | Check items |
|---|---|---|
| D-1D-2D-3 |
|
|
| D-4D-5 | IGN TRX line trouble | Check IGN TRX line |
System Check (Backup Control Unit)
| System Check No. | Possible cause | Check items |
|---|---|---|
| A-1A-2A-3 |
|
|
| B-1B-2 |
|
|
| C-1C-2 |
|
|
| D-1D-2D-3 |
|
|
| E-1E-2E-3E-4E-5 | Keyless Access/TPMS Control Unit is not registered | Register the Keyless Access/TPMS Control Unit |
| F-1F-2F-3F-4F-5 | Special Mode | Turn the vehicle to the ON mode and then select the OFF (LOCK) mode with a registered keyless remote |