DTC P060A: PCM Internal Control Module Malfunction (2016-17)
NOTE:
Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2016-17),
or How to Troubleshoot the A/T System (2016-17)
.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P060A PCM Internal Control Module Malfunction |
DTC (PGM-FI)
- Problem verification:
- 1. Press the engine start/stop button to select the ON mode.
- 2. Clear the DTC with the HDS.
Clear DTC
- 3. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P060A PCM Internal Control Module Malfunction Is DTC P060A indicated?
YES
The failure is duplicated. Update the PCM if it does not have the latest software, or substitute a known-good PCM , then recheck. If DTC P060A goes away and the PCM was updated, troubleshooting is complete. If DTC P060A goes away and the PCM was substituted, replace the original PCM .
NO
Intermittent failure, the system is OK at this time.