Door Key Cylinder Switch Test (2013-17): Test
- Front Door Panel - Remove
1. Remove the driver's door panel - Refer to: Front Door Panel Removal and Installation (2013-17), or Front Door Panel Removal and Installation(With BSI Alert Indicator) (2016-17) . - Door Key Cylinder Switch - Test
- Disconnect the driver's door latch connector.
- Check for continuity between the terminals in each switch position according to the table.
- If the continuity is not as specified, the door key cylinder switch is faulty; replace the driver's door latch (A).
- Connect the driver's door latch connector.
- Front Door Panel - Install
1. Install the driver's door panel - Refer to: Front Door Panel Removal and Installation (2013-17), or Front Door Panel Removal and Installation(With BSI Alert Indicator) (2016-17) .