DTC 18-14: Left-Rear Wheel Speed Sensor Installation Error

Confirmation Procedure

Basic Condition:

With the Driving Pattern:

Start the engine.
Test-drive the vehicle at 19 mph (30 km/h) or more for at least 70 seconds.
(Be careful of the surrounding traffic conditions.)

Execution

Regular Diagnosis

Duration

About 70 seconds

DTC Type	1 drive cycle ABS indicator on VSA indicator on Brake system indicator on (If multiple wheel failures are detected)
Fail Safe Action	Stop ABS function Stop VSA function Stop TCS function Stop brake assist function Stop hill start assist function Stop EBD function (If multiple wheel failures are detected)
Possible Cause	Left-rear wheel speed sensor incorrect installation Left-rear wheel speed sensor failure