Engine Start/Stop Switch Test: Test
- Driver's Dashboard Center Lower Cover - Remove - Refer to: Passenger's Dashboard Center Lower Cover Removal and Installation, or Driver's Dashboard Center Lower Cover Removal and Installation
- Engine Start/Stop Switch - Test
1. Check the engine start/stop switch (A) according to the table. - When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
- Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
2. If the result is not as specified, replace the engine start/stop switch .
- All Removed Parts - Install
1. Install the parts in the reverse order of removal.