DTC U3000-51: Multipurpose Camera Unit Update Incomplete (2016-18)
Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Adaptive Cruise Control (ACC) (2016-18), or How to Troubleshoot the Collision Mitigation Braking System (CMBS) (2016-18) .
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| U3000-51 Multipurpose Camera Unit Update Incomplete |
DTC (IDAS)
- Multipurpose camera unit check (update):
Update the multipurpose camera unit if it does not have the latest software.
- 2. Turn the vehicle to the OFF (LOCK) mode.
- 3. Turn the vehicle to the ON mode, then wait for at least 5 seconds.
- 4. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame U3000-51 Multipurpose Camera Unit Update Incomplete Is DTC U3000-51 indicated?
YES
Check for loose terminals in the multipurpose camera unit 20P connector. If the multipurpose camera unit was updated and the symptom/indication is still present, replace the multipurpose camera unit.
NO
Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTC's troubleshooting.