DTC P16C0: PCM A/T Control System Incomplete Update (2013-18)
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot with the HDS, and review the General Troubleshooting Information - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2013-15), or How to Troubleshoot the A/T System (2013-15), or How to Troubleshoot the Fuel and Emissions Systems (2016-18), or How to Troubleshoot the A/T System (2016-18) .
- This code is indicated when PCM updating is incomplete.
- Do not press the engine start/stop button while updating the PCM. If you do before completion, the PCM can be damaged.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P16C0 PCM A/T Control System Incomplete Update |
DTC (A/T)
- Problem verification:
- 2. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P16C0 PCM A/T Control System Incomplete Update DTC (A/T)
Is DTC P16C0 indicated?
YES
The failure is duplicated. Replace the PCM - Refer to: PCM Removal and Installation (2013-15), or PCM Removal and Installation (2016-18) .
NO
PCM updating is complete. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.