DTC 39-03: EPS Control Unit Internal Circuit (Power Self-Holding Circuit)

• Battery voltage 10 - 16 V

With the Driving Pattern:

• 1.

  Start the engine.

• 2.

  Press the engine start/stop button to select the OFF mode.

• 3.

  Wait more than 30 seconds.

• 4.

  Press the engine start/stop button to select the ON mode.

• 1 drive cycle
• EPS indicator on

• Does not start EPS function/assist(Re-diagnose at the next IG-ON)

• EPS control unit internal failure