Keyless Access Remote Removal, Installation, and Test (KA/KC model) (2014 2015): Installation

NOTE:  If the keyless access control unit is replaced, do the keyless access registration . If the original keyless access control unit is installed, confirm that all systems work properly.

1. Keyless Access Control Unit - Install

   Courtesy of HONDA, U.S.A., INC.

   1. Install the keyless access control unit (A) to the bracket (B).

   Courtesy of HONDA, U.S.A., INC.

   2. Install the keyless access control unit (A). 3. Connect the keyless access control unit connectors.

2. Under-Dash Subrelay Box - Install

   Install the under-dash subrelay box .

3. Keyless Access System - Register

   After replacement, register the keyless access control unit .