LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2017 >> TLX Base, 2.4L Eng >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security System Keyless Entry System - Testing & Troubleshooting >> Keyless Access System Symptom Troubleshooting >> All The Doors Will Not Lock And Unlock
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All The Doors Will Not Lock And Unlock

  1. Door lock actuator operation check 1

    - 1. Remove all the keyless remotes from inside the vehicle, and close all doors.

    - 2. Push each LOCK and UNLOCK buttons of the keyless remote, at least 10 times.

    Do the door lock actuators work normally?

    YES 

    Go to step 2.

    NO 

    Go to step 3.

  2. Door lock actuator operation check 2

    - 1. Lock and unlock the doors with touching the door outer handle.

    Do the door lock actuators work normally?

    YES 

    Intermittent failure, the system is OK at this time. Check for loose or poor connections.

    NO 

    Go to symptom trouble shooting "The doors will not unlock or lock with the door outer handle touch sensor or lock switch, but will unlock or lock with the keyless remote" .

  3. Determine possible failure area (keyless remote, others)

    - 1. Push the LOCK and the UNLOCK buttons of the keyless remote, and check if the LED on the keyless remote comes on.

    Does the LED come on?

    YES 

    Go to step 4.

    NO 

    Replace the keyless remote battery and recheck the system. If the symptom does not go away, replace the keyless remote.

  4. Door lock actuator operation check 2

    - 1. Lock and unlock the doors with touching the door outer handle.

    Do the door lock actuators work normally?

    YES 

    Register the keyless remote , and recheck. If the symptom does not go away, replace the keyless remote.

    NO 

    Go to step 5.

  5. Door lock actuator operation check 3

    - 1. Lock and unlock the doors with the driver's door lock switch.

    Do the door lock actuators work normally?

    YES 

    Go to step 6.

    NO 

    Check the B-CAN system DTCs. If not, check the door lock system.

  6. Keyless access system check

    - 1. Select KEYLESS TRANSMITTER from the BODY ELECTRICAL SYSTEM SELECT menu with the HDS, then select INSPECTION, then KEYLESS CHECK.

    Inspection - Keyless Check

    Press the lock and unlock button and check the response on the screen of the HDS.

    Is KEYLESS ENTRY TRANSMITTER CODE IS NOT RECEIVED indicated?

    YES 

    Replace the keyless remote.

    NO 

    Do the SYSTEM CHECK 1 and SYSTEM CHECK 2 with the HDS . If the result is indicated, troubleshoot the items based on the SYSTEM CHECK table.

Also check for