Driving Position Memory System Description - Control/Function

Memorizing a Seat and Mirror 

Turn the vehicle to the ON mode, and then move the seat and the mirrors to the desired position. Press and hold the SET button on the driving position memory switch. A single beep will be heard and both of the green LED will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat and the mirror positions have been memorized. The LED will remain lit, unless the seat and the mirrors are moved from the memorized position.

Memorized Position Recall with the Remotes 

After the seat and the mirror positions have been memorized, the seat will move to backward 35 mm (1.38 in) from the memorized position, when the doors unlock and the driver's door is opened. When the seat and the mirrors move to the memorized position, after the vehicle is turned to the ON mode. The green LED corresponding with that remote will stay lit until the position is changed or the vehicle is turned to the OFF (LOCK) mode. The seat will move to backward 35 mm (1.38 in) from the memorized position, when turned to the vehicle OFF (LOCK) mode and the driver's door is opened.

Memorized Customized Setting Recall with the Remotes 

Customize setting are controlled independently by remotes (Driver 1 and Driver 2).

Reverse Mirror Control 

When shifting the transmission into R position/mode with the power mirror selector switch in Left (or Right) position, the driver's (or passenger's) side mirror tilts down automatically to help the driver's view. The mirror will return to the previous position when shifting position/mode is out of R position/mode. The reverse mirror control is cancelled if the power mirror selector switch is in the center position.