April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Clear DTCs

NOTE:

Make sure the 12 volt battery is fully charged before you begin.

1. Turn the vehicle to the OFF (LOCK) mode.

2. Connect the Honda Diagnostic System (HDS) .

3. Turn the vehicle to the ON mode.

4. Make sure the HDS communicates with the vehicle and the multi view camera unit. If it does not communicate, go to the DLC circuit troubleshooting - Refer to: DLC Circuit Troubleshooting (L4) (2015-17), or DLC Circuit Troubleshooting (V6, Without CAN gateway) (2015-17), or DLC Circuit Troubleshooting (V6, Without SH-AWD, With CAN gateway) (2015-17), or DLC Circuit Troubleshooting (V6, With SH-AWD and CAN gateway) (2015-17), or DLC Circuit Troubleshooting (L4) (2018-19), or DLC Circuit Troubleshooting (V6, Without SH-AWD) (2018-19), or DLC Circuit Troubleshooting (V6, With SH-AWD) (2018-19) .

5. In the DRIVING SUPPORT MENU of the HDS, select Multi View Camera, then choose the clear DTCs icon, and follow the prompts.

6. Turn the vehicle to the OFF (LOCK) mode.

7. Disconnect the HDS from the DLC.