DTC P060A: PCM Internal Control Module Malfunction (V6)

NOTE:  Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Fuel and Emissions Systems (V6, Without Auto Idle Stop System) or How to Troubleshoot the Fuel and Emissions Systems (V6, With Auto Idle Stop System) .

DTC (PGM-FI)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   - 2. Clear the DTC with the HDS.

   - 3. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P060A PCM Internal Control Module Malfunction

   Is DTC P060A indicated?

   YES 

   The failure is duplicated. Update the PCM if it does not have the latest software, or substitute a known-good PCM - Refer to: PCM Removal and Installation (With SH-AWD) or PCM Removal and Installation (Without SH-AWD) , then recheck. If DTC P060A goes away and the PCM was updated, troubleshooting is complete. If DTC P060A goes away and the PCM was substituted, replace the original PCM - Refer to: PCM Removal and Installation (With SH-AWD) or PCM Removal and Installation (Without SH-AWD) .

   NO 

   Intermittent failure, the system is OK at this time.