LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2017 >> TLX SH-AWD >> Repair and Diagnosis >> Quick Lookups >> Common Specs & Procedures >> Specifications Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Specifications Index

TLX COMMON SPECS & PROCEDURES INDEX

System Specification/Procedure
Air Conditioning
Service

2015-17 

  1. Without SH-AWD: AIR CONDITIONING
  2. With SH-AWD: AIR CONDITIONING

2018-19 

  1. Without SH-AWD: AIR CONDITIONING
  2. With SH-AWD: AIR CONDITIONING
Torque

2015-17 

  1. Without SH-AWD: HEATING, VENTILATION, AND AIR CONDITIONING
  2. With SH-AWD: HEATING, VENTILATION, AND AIR CONDITIONING

2018-19 

  1. Without SH-AWD: HEATING, VENTILATION, AND AIR CONDITIONING
  2. With SH-AWD: HEATING, VENTILATION, AND AIR CONDITIONING
Axle Nut/Hub Nut
Front 328 N.m (242 ft. lbs.)
Rear Knuckle / Hub Bearing Bolts

Without SH-AWD: 103 N.m (76 ft. lbs.)

With SH-AWD: 245 N.m (181 ft. lbs.)
Battery 12 VOLT BATTERY TEST (WITHOUT SH-AWD) or 12 VOLT BATTERY TEST (WITH SH-AWD)
Brakes
Bleeding Sequence CONVENTIONAL BRAKE SYSTEM BLEEDING
Disc Brakes

2015-17 

  1. Without SH-AWD: BRAKES
  2. With SH-AWD: BRAKES

2018-19 

  1. Without SH-AWD: BRAKES
  2. With SH-AWD: BRAKES
Torque

2015-17 

  1. Without SH-AWD: BRAKES
  2. With SH-AWD: BRAKES

2018-19 

  1. Without SH-AWD: BRAKES
  2. With SH-AWD: BRAKES
Charging
Generator brush length

2015-17 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL

2018-19 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL
Torque

2015-17 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL

2018-19 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL
Drive Belts
Belt Routing & Adjustment

K24W7: DRIVE BELT REMOVAL AND INSTALLATION (L4)

J35Y6: DRIVE BELT REMOVAL AND INSTALLATION (V6)
Engine Cooling
General Service Specifications

2015-17 

  1. Without SH-AWD, K24W7: COOLING SYSTEM (K24W7)
  2. Without SH-AWD, J35Y6: COOLING SYSTEM (J35Y6)
  3. With SH-AWD: COOLING SYSTEM

2018-19 

  1. Without SH-AWD, K24W7: COOLING SYSTEM (K24W7)
  2. Without SH-AWD, J35Y6: COOLING SYSTEM (J35Y6)
  3. With SH-AWD, J35Y6: COOLING SYSTEM
Radiator Cap Pressure 93-123 kPa (0.95-1.25 kgf/cm2, 13.5-17.8 psi)
Thermostat R & I

K24W7: THERMOSTAT REMOVAL, INSTALLATION, AND TEST (L4)

J35Y6: THERMOSTAT REMOVAL, INSTALLATION, AND TEST (V6)
Water Pump R & I

K24W7: WATER PUMP REMOVAL AND INSTALLATION (L4)

J35Y6: WATER PUMP REMOVAL AND INSTALLATION (V6)
Engine Mechanical
Compression
  1. 930 kPa (9.48 kgf/cm2 , 134.8 psi) Minimum
  2. 200 kPa (2.04 kgf/cm2 , 29.0 psi) Maximum variation
Oil Pressure (176°F (80°C)

    K24W7: 

  1. 70 kPa (0.71 kgf/cm2 , 10.1 psi) min. @ idle
  2. 300 kPa (3.06 kgf/cm2 , 43.5 psi) min. @ 3000 RPM

    J35Y6: 

  1. 70 kPa (0.71 kgf/cm2 , 10.1 psi) min. @ idle
  2. 490 kPa (5.00 kgf/cm2 , 71.1 psi) min. @ 3000 RPM
Overhaul

2015-17 

  1. Without SH-AWD: See applicable specifications tables in STANDARDS AND SERVICE LIMITS (WITHOUT SH-AWD, KA/KC) (2015-17)
  2. With SH-AWD: See applicable specifications tables in STANDARDS AND SERVICE LIMITS (WITH SH-AWD, KA/KC) (2015-17)

2018-19 

  1. Without SH-AWD: See applicable specifications tables in STANDARDS AND SERVICE LIMITS (WITHOUT SH-AWD, KA/KC) (2018-19)
  2. With SH-AWD: See applicable specifications tables in STANDARDS AND SERVICE LIMITS (WITH SH-AWD, KA/KC) (2018-19)
Torque

2015-17 

  1. Without SH-AWD: See applicable specifications tables in TORQUE SPECIFICATIONS (WITHOUT SH-AWD, KA/KC) (2015-17)
  2. With SH-AWD: See applicable specifications tables in TORQUE SPECIFICATIONS (WITH SH-AWD, KA/KC) (2015-17)

2018-19 

  1. Without SH-AWD: See applicable specifications tables in TORQUE SPECIFICATIONS (WITHOUT SH-AWD, KA/KC) (2018-19)
  2. With SH-AWD: See applicable specifications tables in TORQUE SPECIFICATIONS (WITH SH-AWD, KA/KC) (2018-19)
Fluid Specifications See FLUIDS under MAINTENANCE tab.
Flywheel/Flex Plate Torque 74 N.m (55 ft. lbs.)
Fuel System
Pressure Specification

K24W7:  390-440 kPa (4.0-4.5 kgf/cm2 , 57-64 psi)

J35Y6:  410-460 kPa (4.2-4.7 kgf/cm2 , 60-67 psi)
Fuel Pressure Test Procedure FUEL PRESSURE TEST
Ignition
Firing Order & Cylinder Identification FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug: NGK 96964 (K24W7) or NGK 95350 (J35Y6)
Gap 1.1 mm (.044 in.)
Torque 22 N.m (16 ft. lbs.)
Starting
Starter

2015-17 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL

2018-19 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL
Torque

2015-17 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL

2018-19 

  1. Without SH-AWD, K24W7: ENGINE ELECTRICAL (K24W7)
  2. Without SH-AWD, J35Y6: ENGINE ELECTRICAL (J35Y6)
  3. With SH-AWD, J35Y6: ENGINE ELECTRICAL
Wheel Alignment
Adjustment Specifications

2015-17 

  1. Without SH-AWD: SUSPENSION
  2. With SH-AWD: SUSPENSION

2018-19 

  1. Without SH-AWD: SUSPENSION
  2. With SH-AWD: SUSPENSION
Torque

2015-17 

  1. Without SH-AWD: SUSPENSION
  2. With SH-AWD: SUSPENSION

2018-19 

  1. Without SH-AWD: SUSPENSION
  2. With SH-AWD: SUSPENSION
Wheel & Tire
Wheel Lug Nut Torque 108 N.m (80 ft. lbs.)
scientia non olet · About LEMON Manuals