Keyless Access - Control/Function (2013 2014 2015)
Smart Entry Function
The keyless access control unit detects the input signal of the door outer handle touch sensor or the door lock switch, and authenticates 2-way communication with the remote. Then the keyless access control unit sends a door lock signal, door unlock signal, and an answer back buzzer signal to the MICU via B-CAN line.
Keyless Entry Function
The RF unit receives the keyless transmitter signal from the remote then sends a RF signal to the keyless access control unit. The keyless access control unit authenticates the RF signal, and sends a door lock/unlock signal and trunk lid unlock signal to the MICU via the B-CAN.
Backup Communication Function
The keyless access system has a backup communication feature: If the keyless battery goes dead, touch the remote to the engine start/stop switch on the dashboard. The remote transponder then receives an immobilizer code from the engine start/atop switch, allowing you to start the vehicle.
Key Lockout Prevent Function
The lockout function observes the key switch signal input. If the input is "ON" (remote in the vehicle), the system will not lock the doors. If the driver manually locks and closes the doors with a remote in the vehicle (input ON), the MICU energizes the driver's door actuator and unlocks the driver's door.If the remote remain in the cargo area, the system will not lock the trunk lid. If close the trunk lid when remain the remote in the cargo area, the trunk lid lock will not lock.
Fault Diagnosis Function
The system has a fault diagnosis function. If any malfunction occurs, the keyless access system indicator comes on in the gauge control module.
Panic Function
When you press the PANIC button on the remote, the keyless access control unit sends a signal to the MICU via the B-CAN to sound the horn and activate the exterior lights.
Remote Search Function
Determine if the remote is present inside the vehicle during some operation or function.Detect the door open or close in power ACC/ON mode situation. When the remote is taken out of the vehicle, outside buzzer will sound and multi-information display (Only at power ON mode) will show a warning.
Electric Steering Lock
The electric steering lock control unit is built into the electric steering lock, and it controls the steering lock motor. When the remote code is identified, the electric steering lock control unit unlocks the steering lock by controlling the steering lock motor.
Lighting and indicator Function
The keyless access control unit controls the engine start/stop switch indicator, displays information in the multi-information display, and illuminates the keyless access system indicators in the gauge control module.
Registration Facility
The keyless access control unit can store up to 6 remotes with the HDS.
Client Emergency
If you must stop the engine in an emergency situation, do either of the following:
- Press and hold the engine start/stop switch button.
- Press the engine start/stop switch button three times continuously.