Center Display Unit Connector for Inputs and Outputs
| Connector Index |
| Center Display Unit Connector A (8P) |
| Center Display Unit Connector B (3P) |
| Center Display Unit Connector C (16P) (With Multi View Camera System) |
| Center Display Unit Connector C (16P) (Without Multi View Camera System) |
Center Display Unit Connector A (8P) (female terminals)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| A1 |
Not used |
--- |
| A2 |
Not used |
--- |
| A3 |
Not used |
--- |
| A4 |
GND |
Ground for center display unit (G404) |
| A5 |
+B_AUDIO |
Continuous power source |
| A6 |
Not used |
--- |
| A7 |
Not used |
--- |
| A8 |
DISP_CONT |
Inputs signal for center display unit switching on/off |
Center Display Unit Connector B (3P) (female terminals)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| B1 |
LVDS + |
Communication signal for infotainment control unit |
| B2 |
LVDS - |
Communication signal for infotainment control unit |
| B3 |
LVDS SH |
Shield for terminals No. 1 and No. 2 |
Center Display Unit Connector C (16P) (female terminals) (With Multi View Camera System)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| C1 |
Not used |
--- |
| C2 |
MVS_VID |
Inputs NTSC video signal from multi view camera unit |
| C3 |
Not used |
--- |
| C4 |
Not used |
--- |
| C5 |
Not used |
--- |
| C6 |
IG1_METER |
IG1 power source |
| C7 |
Not used |
--- |
| C8 |
B-CAN_H |
Communication signal |
| C9 |
MVS_GND |
Ground for NTSC video signal |
| C10 |
Not used |
--- |
| C11 |
SH_MVS_VID |
Shield for terminals No. 2 and No. 9 |
| C12 |
Not used |
--- |
| C13 |
BACK_LT |
Detects reverse signal |
| C14 |
MVS_CHK |
Detects connection for multi view camera unit |
| C15 |
MVS_VID_SW |
Inputs camera view mode change signal from multi view camera unit |
| C16 |
B-CAN_L |
Communication signal |
Center Display Unit Connector C (16P) (female terminals) (Without Multi View Camera System)
 Courtesy of HONDA, U.S.A., INC.
|
| Cavity |
Terminal Name |
Description |
| C1 |
CAMERA_VCC |
Power source for rearview camera |
| C2 |
CAMERA_V |
Inputs NTSC video signal from rearview camera |
| C3 |
CAMERA_BIT0 |
Outputs view mode select signal for rearview camera |
| C4 |
CAMERA_BIT1 |
Outputs view mode select signal for rearview camera |
| C5 |
Not used |
--- |
| C6 |
IG1_METER |
IG1 power source |
| C7 |
Not used |
--- |
| C8 |
B-CAN_H |
Communication signal |
| C9 |
CAMERA_GND |
Ground for rearview camera |
| C10 |
CAMERA_ADPT |
Detects connection for rearview camera |
| C11 |
SH_CAMERA |
Shield for terminals No. 1, No. 2, No. 3, No. 4, No. 9, and No. 10 |
| C12 |
Not used |
--- |
| C13 |
BACK_LT |
Detects reverse signal |
| C14 |
Not used |
--- |
| C15 |
Not used |
--- |
| C16 |
B-CAN_L |
Communication signal |