Driving Support DTC Troubleshooting Index
NOTE:
- The DTC troubleshooting index shows DTCs that are stored in the integrated driver support system. Each function of the integrated driver support system operates differently according to which DTC is stored. The functions of the integrated driver support system that operate when these DTCs are stored and their conditions can be confirmed with the table below:
?: Indicator ON, and operation stopo: Operation stop?: Indicator blink, and operation stop
- For the millimeter wave radar, different indicators may be lit for the same DTCs depending on which functions are in operation at the time the DTCs are stored. Make sure to check following DTCs with asterisks before troubleshoot them.
NOTE:
For details on the functions of indicators, and operation stop, refer to "How to Troubleshooting Information.
- How to Troubleshoot the Adaptive Cruise Control (ACC) - Refer to: How to Troubleshoot the Auto High-Beam (High-Beam Support System) or How to Troubleshoot the Road Departure Mitigation or How to Troubleshoot the Lane Keeping Assist System (LKAS) or How to Troubleshoot the Collision Mitigation Braking System (CMBS) or How to Troubleshoot the Adaptive Cruise Control (ACC)
- How to Troubleshoot the Collision Mitigation Braking System (CMBS) - Refer to: How to Troubleshoot the Auto High-Beam (High-Beam Support System) or How to Troubleshoot the Road Departure Mitigation or How to Troubleshoot the Lane Keeping Assist System (LKAS) or How to Troubleshoot the Collision Mitigation Braking System (CMBS) or How to Troubleshoot the Adaptive Cruise Control (ACC)
- How to Troubleshoot the Lane Keeping Assist System (LKAS) - Refer to: How to Troubleshoot the Auto High-Beam (High-Beam Support System) or How to Troubleshoot the Road Departure Mitigation or How to Troubleshoot the Lane Keeping Assist System (LKAS) or How to Troubleshoot the Collision Mitigation Braking System (CMBS) or How to Troubleshoot the Adaptive Cruise Control (ACC)
- How to Troubleshoot the Road Departure Mitigation - Refer to: How to Troubleshoot the Auto High-Beam (High-Beam Support System) or How to Troubleshoot the Road Departure Mitigation or How to Troubleshoot the Lane Keeping Assist System (LKAS) or How to Troubleshoot the Collision Mitigation Braking System (CMBS) or How to Troubleshoot the Adaptive Cruise Control (ACC)
- Brake System (How to Troubleshoot the VSA System)
- How to Troubleshoot the Auto High-Beam - Refer to: How to Troubleshoot the Auto High-Beam (High-Beam Support System) or How to Troubleshoot the Road Departure Mitigation or How to Troubleshoot the Lane Keeping Assist System (LKAS) or How to Troubleshoot the Collision Mitigation Braking System (CMBS) or How to Troubleshoot the Adaptive Cruise Control (ACC)
| DTC | Detection Item | Indicator Illumination/Operation in Case of a Failure | ||||||
|---|---|---|---|---|---|---|---|---|
| ACC System | CMBS | LKAS | RDM System | Brake System (Amber) | Auto High-Beam | Safety Support (Amber) | ||
| B0050-F0 | (Driver's Seat Belt Buckle Switch (Subfault) Fault Detection By SRS Unit) | ? | - | - | - | ? | - | - |
| B2A00-92 | Temporary stop of Integrated Driver Support System (Detected Abnormal Signals) | ? | o | - | o | ? | - | ? |
| B2A60-49 | Multipurpose Camera Unit Internal Electronic Failure | ? | o | ? | o | ? | o | ? |
| B2A60-54 | Static Camera Aiming Incomplete | ? | o | ? | o | - | o | ? |
| B2A60-57 | Multipurpose Camera Unit Software Failure | ? | o | ? | o | ? | o | ? |
| B2A60-96 | Multipurpose Camera Unit Hardware Malfunction | ? | o | ? | o | ? | o | ? |
| B2A60-97 | Dust or Dirt On The Camera | - | o | o | o | - | o | ? |
| B2A60-98 | Multipurpose Camera Unit Temperature Too High | - | o | o | o | - | o | ? |
| B2A60-99 | Out of automatic correction range for Misalignment of Multipurpose Camera Unit image | o | o | ? | o | - | o | ? |
| B2A60-A2 | Power Supply Voltage Too Low (Multipurpose Camera Unit) | o | o | ? | o | - | o | ? |
| B2A60-A3 | Power Supply Voltage Too High (Multipurpose Camera Unit) | o | o | ? | o | - | o | ? |
| C0023-F0 | Brake Light Drive Relay Circuit Malfunction | ? | o | - | o | ? | - | o |
| C0031-62 | (Left Front Wheel Speed Sensor Signal Error) | ? | o | ? | o | ? | - | ? |
| C0034-62 | (Right Front Wheel Speed Sensor Signal Error) | ? | o | ? | o | ? | - | ? |
| C0037-62 | (Left Rear Wheel Speed Sensor Signal Error) | ? | o | ? | o | ? | o | ? |
| C003A-62 | (Right Rear Wheel Speed Sensor Signal Error) | ? | o | ? | o | ? | o | ? |
| C0041-14 | Brake Switch Signal Circuit Error | ? | o | - | o | ? | - | ? |
| C0044-F0 | (Master Cylinder Pressure Sensor Failure) | ? | o | o | o | ? | - | ? |
*1: When the system detects the ACC and the RDM failure while operating.*2: When the system detects the CMBS failure while operating.*3: When the system detects the LKAS failure while operating.*4: When the millimeter wave radar receives gauge control module failure information.*5: When related B-CAN system or switch failure information (judged by the gauge control module) is received.*6: After the DTC is stored, the message (Radar Obstructed) is displayed on the MID at the initial stage, and then the indicators come on.
| DTC | Detection Item | Indicator Illumination/Operation in Case of a Failure | ||||||
|---|---|---|---|---|---|---|---|---|
| ACC System | CMBS | LKAS | RDM System | Brake System (Amber) | Auto High-Beam | Safety Support (Amber) | ||
| C0051-54 | Steering Angle Neutral Position Learning Incomplete | ? | o | o | o | - | o | ? |
| C0051-96 | Steering Angle Sensor Malfunction | ? | o | o | o | ? | o | ? |
| C0061-9A | Temporary stop of Integrated Driver Support System (Unstable Lateral Acceleration Sensor Signal) | - | - | - | - | - | o | - |
| C0061-F0 | Lateral Acceleration Sensor(Subfault) Fault Detection By Source Module | - | - | - | - | - | o | - |
| C0062-9A | Temporary stop of Integrated Driver Support System (Unstable Longitudinal Acceleration Sensor Signal) | o | o | - | o | - | - | ? |
| C0062-F0 | Longitudinal Acceleration Sensor (Subfault) Fault Detection By Source Module | ? | o | - | o | ? | - | ? |
| C0063-9A | Temporary stop of Integrated Driver Support System (Unstable Yaw Rate Sensor Signal) | o | o | o | o | - | o | ? |
| C0063-F0 | Yaw Rate Sensor (Subfault) Fault Detection By Source Module | ? | o | o | o | ? | o | ? |
| C1040-00 | Wheel Speed Signal Error | ? | o | - | o | ? | - | ? |
| C1C00-F0 | (APP Sensor Signal Failure) | - | - | - | o | ? | - | ? |
| P0564-11 | ACC/LKAS Switch Signal Circuit Short | ? | - | ? | - | ? | - | - |
| P0564-15 | ACC/LKAS Switch Signal Circuit Open | ? | - | ? | - | ? | - | - |
| P0589-11 | Main Switch Signal Circuit Short | ? | - | ? | - | ? | - | - |
| P0589-15 | Main Switch Signal Circuit Open | ? | - | ? | - | ? | - | - |
| P2583-49 | Millimeter Wave Radar Internal Electronic Failure | ? | o | ? | o | ? | - | ? |
| P2583-54 | Millimeter Wave Radar Aiming Incomplete | ? | o | ? | o | - | - | ? |
| P2583-76 * 6 | Temporary stop of Integrated Driver Support System (Misalignment Millimeter Wave Radar) | ? | o | - | o | ? | - | ? |
| P2583-92 | CMBS or FCW Over Working | - | o | - | - | ? | - | ? |
| P2583-97 | Dust or Dirt On The Millimeter Wave Radar | o | o | - | o | - | - | ? |
| P2583-98 | Millimeter Wave Radar Temperature Too High | ? | o | ? | o | - | - | ? |
| P2583-9A | Temporary stop of Integrated Driver Support System (Jammed Millimeter Wave Radar) | ? | o | ? | o | ? | - | ? |
| U0029-00 | F-CAN Malfunction (BUS-OFF) | ? | o | ? | o | ? | o | ? |
| U0029-F1 | F-CAN Malfunction (BUS-OFF) (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
| U0047-00 | Millimeter Wave Radar Local-CAN Malfunction (BUS-OFF) | ? | o | ? | o | ? | o | ? |
| U0047-F1 | Multipurpose Camera Unit Local-CAN Malfunction | ? | o | ? | o | ? | o | ? |
| U0100-00 | Lost Communication With The PCM (PGM-FI System) | ? | o | - | o | ? | - | ? |
| U0100-F1 | Lost Communication With The PCM (PGM-FI System) (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
| U0101-00 | Lost Communication With The PCM/TCM | ? | o | - | o | ? | - | ? |
| U0101-F1 | Lost Communication With The PCM/TCM (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
| U0122-00 | Lost Communication With The VSA Modulator-Control Unit | ? | o | - | o | ? | - | ? |
| U0122-F1 | Lost Communication With The VSA Modulator-Control Unit (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
*1: When the system detects the ACC and the RDM failure while operating.*2: When the system detects the CMBS failure while operating.*3: When the system detects the LKAS failure while operating.*4: When the millimeter wave radar receives gauge control module failure information.*5: When related B-CAN system or switch failure information (judged by the gauge control module) is received.*6: After the DTC is stored, the message (Radar Obstructed) is displayed on the MID at the initial stage, and then the indicators come on.
| DTC | Detection Item | Indicator Illumination/Operation in Case of a Failure | ||||||
|---|---|---|---|---|---|---|---|---|
| ACC System | CMBS | LKAS | RDM System | Brake System (Amber) | Auto High-Beam | Safety Support (Amber) | ||
| U0128-00 | Lost Communication With The Electric Parking Brake Control Unit | ? | - | - | - | ? | - | - |
| U0129-00 | Lost Communication With The Electric Servo Brake Control Unit | ? | o | - | o | ? | - | ? |
| U0129-F1 | Lost Communication With The Electric Servo Brake Control Unit (Multipurpose Camera Unit) | ? | o | ? | o | ? | - | ? |
| U0131-00 | Lost Communication With The EPS Control Unit | ? | o | - | o | ? | - | ? |
| U0131-F1 | Lost Communication With The EPS Control Unit (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
| U0146-00 | Lost Communication With The CAN Gateway | ? | o | - | o | ? | - | ? |
| U0151-00 | Lost Communication With The SRS Unit | ? | o | - | o | ? | - | ? |
| U0151-F1 | Lost Communication With The SRS Unit (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
| U0155-00 | Lost Communication With The Gauge Control Module | ? | o | - | o | ? | - | ? |
| U0155-F1 | Lost Communication With The Gauge Control Module (Multipurpose Camera Unit) | ? | o | ? | o | ? | o | ? |
| U0401-53 | Temporary stop of Integrated Driver Support System (Received stop request by PGM-FI System) | - | o | - | o | - | - | ? |
| U0401-68 | (PCM (PGM-FI System) Malfunction) | ? | o | o | o | ? | o | ? |
| U0401-92 | Temporary stop of Integrated Driver Support System (Rejected control request by PGM-FI System) | o | o | o | - | - | - | ? |
| U0402-68 | (PCM/TCM Malfunction) | ? | o | - | o | ? | o | ? |
| U0415-68 | (ABS Brake Actuator Malfunction) | ? | o | o | o | ? | - | ? |
| U0416-68 * 1 | (VSA Brake Actuator Malfunction) | ? | - | - | o | ? | - | ? |
| U0416-68 * 3 | (VSA Brake Actuator Malfunction) | ? | o | o | o | ? | - | ? |
| U0416-9A | Temporary stop of Integrated Driver Support System (Unstable Wheel Speed Sensor Signal) | o | o | o | o | - | o | ? |
| U0417-68 | (Electric Parking Brake Control Unit Malfunction) | ? | - | - | - | ? | - | - |
| U0418-68 | (Electric Servo Brake System Malfunction) | ? | o | - | o | ? | - | ? |
| U0418-92 | Temporary stop of Integrated Driver Support System (Rejected control request by ESB/EBB System) | o | - | - | - | - | - | - |
| U0418-92 | Temporary stop of Integrated Driver Support System (Rejected control request by ESB/EBB System) | - | o | - | - | - | - | ? |
| U0418-9A | Temporary stop of Integrated Driver Support System (Not Start-Up ESB/EBB Control Unit) | o | o | - | - | - | - | ? |
| U0420-68 | (EPS Control Unit Malfunction) | - | o | ? | o | ? | - | ? |
| U0423-68 * 4 | Gauge Control Module Malfunction/B-CAN Malfunction (BUS-OFF) Detection By Source Module | ? | o | ? | o | ? | - | ? |
| U0423-68 * 5 | Gauge Control Module Malfunction/B-CAN Malfunction (BUS-OFF) Detection By Source Module | ? | o | ? | o | ? | o | ? |
| U1280-00 | Lost Communication With The B-CAN Systems | - | - | ? | o | ? | o | ? |
*1: When the system detects the ACC and the RDM failure while operating.*2: When the system detects the CMBS failure while operating.*3: When the system detects the LKAS failure while operating.*4: When the millimeter wave radar receives gauge control module failure information.*5: When related B-CAN system or switch failure information (judged by the gauge control module) is received.*6: After the DTC is stored, the message (Radar Obstructed) is displayed on the MID at the initial stage, and then the indicators come on.
| DTC | Detection Item | Indicator Illumination/Operation in Case of a Failure | ||||||
|---|---|---|---|---|---|---|---|---|
| ACC System | CMBS | LKAS | RDM System | Brake System (Amber) | Auto High-Beam | Safety Support (Amber) | ||
| U1281-00 | Lost Communication with The MICU (Body Control Module) | - | - | - | - | - | o | - |
| U128C-00 | Lost Communication with The Wiper Control Unit | - | - | ? | o | ? | o | ? |
| U12B7-00 | Millimeter Wave Radar Local-CAN Malfunction | ? | o | ? | o | ? | - | ? |
| U1387-4A | Unmatch Combination of Millimeter Wave Radar-Multipurpose Camera Unit | ? | o | ? | o | ? | o | ? |
| U1387-55 | Multipurpose Camera Unit Variant Incomplete | ? | o | ? | o | - | o | ? |
| U3000-49 | Millimeter Wave Radar Internal Electronic Failure | ? | o | ? | o | ? | - | ? |
| U3000-51 | Millimeter Wave Radar Update Incomplete | ? | o | ? | o | ? | - | ? |
| U3000-55 | Millimeter Wave Radar Variant Incomplete | ? | o | ? | o | - | o | ? |
| U3000-57 | Millimeter Wave Radar Software Failure | ? | o | ? | o | ? | - | ? |
| U3006-16 | Power Supply Voltage Too Low (Millimeter Wave Radar) | o | o | ? | o | - | - | ? |
| U3006-17 | Power Supply Voltage Too High (Millimeter Wave Radar) | o | o | ? | o | - | - | ? |
*1: When the system detects the ACC and the RDM failure while operating.*2: When the system detects the CMBS failure while operating.*3: When the system detects the LKAS failure while operating.*4: When the millimeter wave radar receives gauge control module failure information.*5: When related B-CAN system or switch failure information (judged by the gauge control module) is received.*6: After the DTC is stored, the message (Radar Obstructed) is displayed on the MID at the initial stage, and then the indicators come on.