Driving Position Memory Clear: Procedure

Clear the driving position memory after doing any of the following actions:

Power seat motor test or replacement.
Substituting a known-good power seat control unit.

NOTE: The memory for position 1 and 2 are stored in the power seat control unit. If the driving position memory is cleared, the memory stored in the power seat control unit is cleared.

Driving Position Memory - Clear
1. Turn the vehicle to the OFF (LOCK) mode.

Courtesy of HONDA, U.S.A., INC.

2. Press and hold the ' button of the lumbar switch.

3. Turn the vehicle to the ON mode.

4. Release the ' button of the lumbar switch.

5. Repeat steps 1-4 three more times.
NOTE:
- Once the memory is successfully cleared, the driving position memory switch indicator 1 and 2 turns on for 3 seconds.
- If the indicators did not turn on, go back to step 1 and repeat the procedure.