SH-AWD? Control Unit Initialization: Procedure

How to use this manual .

NOTICE: 

When you replace the SH-AWD control unit, do this procedure.

1. SH-AWD Control Unit - Initialization

   Preconditions 

   • Vehicle on Level Ground
   • No DTCs Set
   • HDS Connected
   • Yaw Rate-Acceleration Neutral Position Memorization Completed - Refer to: VSA Modulator-Control Unit Update or VSA Sensor Neutral Position Memorization

   Procedure 

   • Select the following menu buttons on the HDS screen in sequence.
   • • SH-AWD (System Selection Menu)
     • ADJUSTMENT
     • INITIALIZATION

       NOTICE: 

       See the HDS Help menu for specific instructions.