DTC Troubleshooting: P2450 (3.0L Engine): Notes

DTC P2450 : Evaporative Emission (EVAP) System Purge Line Non-return Valve Stuck Open

NOTICE:

Before you troubleshoot, review the How to Troubleshoot - Refer to: How to Troubleshoot the Fuel and Emissions Systems (2.0L Engine) or How to Troubleshoot the Fuel and Emissions Systems (3.0L Engine) .
The fuel system is designed to allow specified maximum vacuum and pressure conditions. Do not deviate from the vacuum and pressure tests as indicated in these procedures. Excessive pressure/vacuum would damage the EVAP components or cause eventual fuel tank failure.

NOTE: Fresh fuel has a higher volatility that will create greater pressure/vacuum. The best condition for testing is less than a full tank of fresh fuel. If possible, to assist in leak detection, add 1 gallon of fresh fuel to the tank (as long as it will not fill the tank), just before starting these procedures.