Functional Setup

These screens allow you to setting/checking various functions related the infotainment control unit.

• Backup Data Clear 

  This screen initializes the back-up data in the infotainment control unit.

  The all clear function deletes the data in the infotainment control unit, and restores it to the factory defaults. This function is equivalent to Factory Data Reset in the System Settings Menu.

  NOTE:

  This procedure should get the client's permission first because clearing a PIN code for user account at the same time.

• • Select the All Clear icon.
  • When the confirmation screen appears, select the Yes icon.
  • When the confirmation screen appears again, select the Yes icon. The system restarts after performing the All Clear process. After the restart, a normal startup process occurs.

• Digital Owner's Manual 

  This screen can delete the digital owner's manual stored in the infotainment control unit.

  NOTE: This function may communicate with the Honda server.

• Save User's Memory 

  When replacing the infotainment control unit, this function allows the technician to transfer the client's personal data to the new infotainment control unit. The transferred information includes their setup settings and personal addresses.

  NOTE:

  The infotainment control unit cannot transfer the account information about the Google-App and PIN codes about the user account. These information need re-setting when replacing the infotainment control unit.

• • -

    Export: This function saves the client's data to the USB device.

  • -

    Import: This function moves the USB device files to the new infotainment control unit.

• • Insert a USB device into USB port A, and then select the Save Users Memory function.
    NOTE: This function does not start until you connect a USB device to the USB port.
  • Select the Export icon to move the client's data from the original infotainment control unit to the USB device. Select the Yes icon on the Export User Data Confirmation screen. The process takes only a couple of seconds.
    NOTE: If the Export icon is grayed out, check the USB port.
  • After replacing the new infotainment control unit, allow the system to boot up.
  • Insert the USB device into USB port A and enter the Save Users Memory in the System Diagnostic Mode.
  • Select the Import icon to move the two files stored by the Export process from the USB device to the new infotainment control unit. Select the Yes icon on the Import User Data Confirmation screen. When the transfer is finished (a few seconds) the system automatically reboots. After the system reboots, remove the USB device from the USB port.

• Anti-Theft Skip 

  This selection can cancel the anti-theft mode temporarily (for 150 seconds).

  The Anti-Theft Skip icon is grayed out when the anti-theft mode is already canceled.