Multipurpose Camera Unit Inspection

Preconditions 

NOTE:  This procedure can be done before any other inspections are completed because this test procedure includes all of the following inspection items. However, if this test fails, it will be necessary to continue with each inspection item individually to determine which item failed.

• Multipurpose camera unit installation is normal.
• Wheel alignment is normal.
• Multipurpose camera axis offset correction is normal.

Test Procedure 

• Procedure
• • Do the multipurpose camera aiming - Refer to: Multipurpose Camera Aiming (2022 2023 2024) or Multipurpose Camera Aiming (Integrated Driver Support System (Camera and Five Radars) / Static Aiming) (2025) or Multipurpose Camera Aiming (Integrated Driver Support System / Static Aiming) (2025) or Multipurpose Camera Unit Update (2022 2023 2024) or Vehicle Conditions that require Multipurpose Camera Aiming (Integrated Driver Support System) (2025) or Multipurpose Camera Unit Update (Integrated Driver Support System) (2025) or Multipurpose Camera Aiming (Integrated Driver Support System (Camera and Five Radars) / Dynamic Aiming) (2025) or Multipurpose Camera Aiming (Integrated Driver Support System / Dynamic Aiming) (2025) or Multipurpose Camera Unit Update (Integrated Driver Support System (Camera and Five Radars)) (2025) or Vehicle Conditions that require Multipurpose Camera Aiming (Integrated Driver Support System (Camera and Five Radars)) (2025) .
  • Perform the confirmation procedure.

• Normal Conditions
• • -

    DTC B2A60-99 is not indicated.

Results 

• If it is abnormal, there is a problem with the multipurpose camera unit.