Multipurpose Camera Unit Inspection
Preconditions
NOTE:
This procedure can be done before any other inspections are completed because this test procedure includes all of the following inspection items. However, if this test fails, it will be necessary to continue with each inspection item individually to determine which item failed.
- Multipurpose camera unit installation is normal.
Test Procedure
- Procedure
-
- Do the multipurpose camera aiming - Refer to: Multipurpose Camera Aiming (Static Camera Aiming) or Multipurpose Camera Aiming (Dynamic Camera Aiming) or Vehicle Conditions that require Multipurpose Camera Aiming or Multipurpose Camera Unit Update .
- Perform the confirmation procedure.
- Normal Conditions
-
- DTC B2A60-92 is not indicated.
Results
- If it is abnormal, there is a problem with the multipurpose camera unit.