VTC Oil Control Solenoid Valve A Component Inspection

Test Procedure 

• Preparation
• • -

    VTC oil control solenoid valve A connector (2P): disconnected

• Procedure
• • -

    Perform the inspection according to the following table.

(Disconnected) VTC oil control solenoid valve A connector (2P) male terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

Valve internal circuit inspection 

OFF

About 7.14 - 7.90 Ohm (at room temperature) 

Results 

• If abnormal, there is a problem with VTC oil control solenoid valve A.