Repair Procedure

How to use this service information .

Courtesy of HONDA, U.S.A., INC.

: Torque, N.m (lbf.ft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

: SPL Tool

: Required Removal

*1: With Door Mirror Side Turn Signal Light

Courtesy of HONDA, U.S.A., INC.

: Torque, N.m (lbf.ft)

: Replace

: Warning/Caution

: Inspection/Adjustment

*: Learning

: SPL Tool

: Required Removal

1. A.-

   Sub-Procedure 

   ■ Removal 

   1. Carefully push on the bottom edge of the mirror holder (a) by hand.

   Courtesy of HONDA, U.S.A., INC.

   2. Carefully pull out the top edge of the mirror holder by hand from the actuator (b).

   NOTE:

   Apply protective tape as necessary around the mirror assembly to prevent damage.

2. B.-

   Sub-Procedure 

   Figure 1 

   Courtesy of HONDA, U.S.A., INC.

   Figure 2 

   Courtesy of HONDA, U.S.A., INC.

   ■ Removal 

   • Refer to figures 1 and 2.
3. C.-

   Sub-Procedure 

   Figure 1 

   Courtesy of HONDA, U.S.A., INC.

   Figure 2 

   Courtesy of HONDA, U.S.A., INC.

   ■ Removal 

   • Refer to figures 1 and 2.
4. D.-

   Courtesy of HONDA, U.S.A., INC.

5. E.-

   Key Information 

   Do the following before starting your work.

   Remove: 

   • Front Door Plastic Cover (as needed)
6. F.-

   Sub-Procedure 

   Courtesy of HONDA, U.S.A., INC.

   ■ Removal 

   • Refer to the figure.