APP Sensor Inspection
NOTE: Since there is no direct method to test the inspection item, the defective component judgement is based on the results from the other inspection items.
Test Procedure
- Preparation
-
- -
APP sensor connector (6P): disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected)APP sensor connector (6P)female terminals
IG Mode
Normal Conditions
Unit output voltage inspection
ON
About 5.0 V
Results
- If it is normal, there is a problem with the accelerator pedal module.
- If it is abnormal, there is a problem with other related components.