+B_ADS Circuit Inspection

Test Procedure 

• Preparation
• • -

    Adaptive damper control unit connector (24P): disconnected

• Procedure
• • -

    Perform the inspection according to the following table.

(Disconnected) Adaptive damper control unit connector (24P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

+B_ADS circuit inspection 

OFF

12 V battery voltage[circuit type 1] 

Results 

• If abnormal, there is a problem in the circuit.
  NOTE:

  If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.

• If normal, there is a problem with the adaptive damper control unit.