Transmission will not shift into P position/mode, or transmission cannot shift out of P position/mode (CVT)

Probable cause(s)

• TCM defective
• Drive pulley, driven pulley, pulley shaft, steel belt, and pulley related parts worn or damaged
• Transmission range switch defective or out of adjustment
• Shift cable broken or out of adjustment
• Control pin broken
• Control shaft, roller, detent lever, and detent spring worn or damaged
• Control lever worn or damaged
• Parking brake pawl and parking shaft worn or damaged
• Park gear worn or damaged
• Parking pawl spring worn or damaged
• Manual valve worn or damaged
• Valve body assembly defective
• Stator shaft worn or damaged

Notes

• Inspect the transmission range switch .
• Check for a loose shift cable at the shift lever and the control lever .