Multipurpose Camera Unit Visual Inspection

Test Procedure 

• Procedure
• • Remove the multipurpose camera unit.
  • Check for any dust or the dirt on the multipurpose camera lens.

• Normal Conditions
• • -

    Multipurpose camera unit lens surface are clean.

Results 

• If it is abnormal, there is a problem with the multipurpose camera lens.
• If it is normal, there is a problem with the multipurpose camera unit.

• If the camera lens is dirty, wipe gently with a lens pen, etc. to avoid damaging the camera lens.
• After wiping the camera lens, shed light on the lens surface with a flashlight, etc. and check that there is no dirt left before attaching it to the vehicle.
• The multipurpose camera unit must be re-aimed - Refer to: Multipurpose Camera Aiming (2022 2023 2024) or Multipurpose Camera Aiming (Integrated Driver Support System (Camera and Five Radars) / Static Aiming) (2025) or Multipurpose Camera Aiming (Integrated Driver Support System / Static Aiming) (2025) or Multipurpose Camera Unit Update (2022 2023 2024) or Vehicle Conditions that require Multipurpose Camera Aiming (Integrated Driver Support System) (2025) or Multipurpose Camera Unit Update (Integrated Driver Support System) (2025) or Multipurpose Camera Aiming (Integrated Driver Support System (Camera and Five Radars) / Dynamic Aiming) (2025) or Multipurpose Camera Aiming (Integrated Driver Support System / Dynamic Aiming) (2025) or Multipurpose Camera Unit Update (Integrated Driver Support System (Camera and Five Radars)) (2025) or Vehicle Conditions that require Multipurpose Camera Aiming (Integrated Driver Support System (Camera and Five Radars)) (2025) if the multipurpose camera unit is removed or replaced.