APP Sensor Inspection
Preconditions
NOTE:
This procedure can be done before any other inspections are completed because this test procedure includes all of the following inspection items. However, if this test fails, it will be necessary to continue with each inspection item individually to determine which item failed.
- External circuit is normal
Test Procedure
- Procedure
-
- Turn the vehicle to the ON mode.
- Press the accelerator pedal to any position and keep it.
- Confirm the HDS [APP Sensor A Voltage] value and the [APP Sensor B Voltage] value.
- Normal Conditions
-
- -
HDS [APP Sensor A Voltage] value is about twice as [APP Sensor B Voltage] value at any accelerator pedal position.
- -
Results
- If it is abnormal, there is a problem with the accelerator pedal module.