+B_EPS (EPS) Circuit Inspection

Test Procedure 

• Preparation
• • -

    EPS control unit connector A (2P): disconnected

• Procedure
• • -

    Perform the inspection according to the following table.

(Disconnected) EPS control unit connector A (2P) - Refer to: EPS Control Unit Connector for Inputs and Outputs (2022 2023 2024) or EPS Control Unit Connector for Inputs and Outputs (2025) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

+B_EPS (EPS) circuit inspection 

OFF

12 V battery voltage[circuit type 1] 

Results 

• If abnormal, there is a problem in the circuit.

  If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.