TP Sensor Inspection
NOTE:
Since there is no direct method to test the component itself, troubleshooting is performed on the related components.
Test Procedure
Unit output voltage inspection
- Preparation
-
- -
Throttle body 6P connector: disconnected
- -
- Procedure
-
- Turn the vehicle to the ON mode.
- Confirm the HDS [TP Sensor A] value and the HDS [TP Sensor B Voltage] value.
- Normal Conditions
-
- -
HDS [TP Sensor A] value is about 5.0 V .
- -
HDS [TP Sensor B] value is about 0 V .
- -
Results
- If it is normal, there is a problem with the throttle body.
- If it is abnormal, there is a problem with other related components.